Documentation

System2 — current range

Our current wireless range. Each board is configured from its own built‑in web pages — these references cover every setting.

• System2 — Read firstStart here: what’s in the box and how the System2 range fits together.
• System2 Starter Kit — Quick StartGet your first board on Wi‑Fi and switching points in minutes.
• System2 Panel Controller, IN‑32 & OUT‑32 — User ReferenceFull reference for the Panel Controller and the IN‑32 / OUT‑32 expanders.
• System2 Servo‑8 — User GuideStep‑by‑step setup for the eight‑output servo driver.
• System2 Servo‑8 — User ReferenceComplete settings reference: easing, end‑points, frog and CAN options.
• System2 OUT‑64 — User ReferenceSixty‑four outputs for large signal and accessory installations.
• System2 Relay‑8 — User ReferenceEight relay outputs for frog polarity and high‑current switching.
• System2 Stall / Kato Motor Driver — User ReferenceDrive slow‑motion stall motors and Kato turnouts.
• System2 Solenoid Driver — User ReferenceCapacitor‑discharge driving for twin‑coil solenoid point motors.
• System2 DCC Accessory Decoder — User ReferenceDrive System2 outputs from any DCC command station.
• System2 ROUTE — User ReferenceSet whole routes from a single press.
• System2 RFID Dual Reader — User ReferenceTwo‑channel RFID train detection and identification.
• System2 RFID Quad Display Driver — User ReferenceDrive four numeric displays from RFID train IDs.

Classic — Mimic panels (MultiPanel & MiniPanel)

• MultiPanel Processor — User Guide (V2, latest)The current MultiPanel guide — V2 boards and latest firmware.
• MultiPanel Processor — User Guide (V2.1 onward)Earlier V2 reference for boards from version 2.1.
• MultiPanel Processor — User Guide (all V1.x boards)For the original version 1 MultiPanel boards.
• MiniPanel — User GuideThe compact MiniPanel mimic controller.
• MiniPanel Starter Kit — Quick StartPlug‑and‑play first switching with the MiniPanel kit.
• Custom mimic panel — BrochureBespoke engraved mimic panels made to your track plan.
• Mimic panel enclosure — Self-assemblyBuild instructions for the mimic‑panel enclosure.

Classic — Point, signal & motor control

• Servo Controller‑12 — User Guide (v1.9, latest)Current guide for the twelve‑output servo controller.
• Servo Controller‑12 — User Guide (v1.8)For boards running firmware 1.8.
• Servo Controller‑12 — User Guide (to v1.6)Earlier servo controller firmware, up to 1.6.
• Servo Controller‑4R — User GuideFour‑output servo controller with built‑in frog relays.
• Stall / Kato Motor Driver — User GuideDrive slow‑motion stall motors and Kato turnouts.
• MTB Motor Driver — User GuideFor MTB slow‑motion point motors.
• Solenoid Driver — User Guide (Rev 2, latest)Capacitor‑discharge driving for twin‑coil solenoid motors.
• Relay / Frog Driver Module — User GuideRelay outputs for frog polarity and switching.
• Cobalt iP Digital Motor Driver — User GuideDriving DCCconcepts Cobalt iP Digital point motors.

Classic — Routing, DCC, feedback & detection

• Route Processor — User Guide (Rev 6, latest)Set entire routes from a single button; current guide.
• Route Processor — User Guide (Rev 5, hw 1.4)For Route Processor hardware 1.4 with built‑in buzzer.
• Route Processor — User Guide (hw 1.3 & earlier)For the original Route Processor boards.
• DCC Module — User Guide (Rev 9, latest)Current DCC interface guide; covers all version 1.6 boards.
• DCC Module — User Guide (all versions)Covers earlier DCC module hardware.
• Feedback Module — User GuideBlock occupancy and feedback detection.
• Automatic Brake Controller (ABC) — User GuideGenerate DCC asymmetric (ABC) braking sections for automatic stopping.

Classic — Signals

• AutoSignal — User GuideAutomatic colour‑light signalling driven by block detection.

Classic — Starter kits

• Starter Kit — Servo Edition Quick StartPlug‑and‑play first setup; servo edition / MultiPanel V2.1.
• Starter Kit — Solenoid Edition Quick StartPlug‑and‑play first setup; solenoid edition / MultiPanel V2.1.
• Starter Kit — Stall / Kato Edition Quick StartPlug‑and‑play first setup; stall / Kato edition.

Classic — Networking & reference

• CAN Module — User Guide (board v1.3, current)Connect boards over the CAN network backbone.
• CAN Adapter — User GuideUSB / serial adapter for the CAN network.
• Networking Guide & backgroundHow MegaPoints networking and addressing work.
• Network Address — Cheat sheetQuick reference for setting board network addresses.
• Hackers Guide (Arduino / Raspberry Pi)Integrate MegaPoints boards with Arduino and Raspberry Pi.
• Generic enclosure — Assembly instructionsAssemble the generic board enclosure.
• Enclosure — Assembly guide (2025)Latest enclosure assembly guide.

Worked examples & signalling plans

• Ashdean EastWorked example layout and signalling plan.
• BeauchampWorked example layout and signalling plan.
• Branch TMDWorked example layout and signalling plan.
• Kingswear & GoodringtonWorked example layout and signalling plan.