System2 Solenoid Driver (20 Volt edition)

System2 Solenoid Driver (20 Volt edition)

£79.20 (£66.00 ex VAT)

The System2 Solenoid Driver (20 Volt edition) has the following features:

  • Powered with a 20 – 24 volts allowing you to adjust the solenoid ‘thump’.
  • Supports up to 4 solenoid channels.
  • Built in CDU (Capacitive Discharge Unit).
  • Huge reservoir capacitor (plenty of thump).
  • Intelligent firing, will only fire when capacitor is charged.
  • Control via two wire CAN bus.
  • Optional control via Wi-Fi (native mode).
  • Optional control via Wi-Fi (JMRI mode).
  • Can support two motors per output (assuming they move freely).
  • Addressable via vPort for both command and feedback.
  • Software updateable as new features arrive.

Control either via CAN bus (twisted pair network cable) or via Wi-Fi (MQTT).

Supports Wi-Fi modes native and JMRI (JMRI coming soon).

In stock (can be backordered)

SKU: S2SSOL4-24V Category:

Description

The System2 Solenoid Driver (20 Volt edition) has the following features:

  • Powered with a 20 – 24 volts allowing you to adjust the solenoid ‘thump’.
  • Supports up to 4 solenoid channels.
  • Built in CDU (Capacitive Discharge Unit).
  • Huge reservoir capacitor (plenty of thump).
  • Intelligent firing, will only fire when capacitor is charged.
  • Control via two wire CAN bus.
  • Optional control via Wi-Fi (native mode).
  • Optional control via Wi-Fi (JMRI mode).
  • Can support two motors per output (assuming they move freely).
  • Addressable via vPort for both command and feedback.
  • Software updateable as new features arrive.

Documentation

Read this first

Solenoid User Reference / Guide

 

Videos

Solenoid Driver Introduction

MQTT Broker installation Guide for Windows 10 (required for Wi-Fi use).

Additional information

Weight 78 g
Dimensions 15 × 12 × 2 cm

Related products